ERNiCrMo-11

Class: ERNiCrMo-11
AWS: A5.14

Conforms to Certification: AWS A5.14 | ASME SFA A5.14

Weld Process: GTAW Welding Process

AWS Chemical Composition Requirements

C = 0.03 max Cu = 1.0 – 2.4
Mn = 1.5 max Ni = Remainder
Fe = 13.0 – 17.0 Co = 5.0 max
P = 0.04 max Cr = 28.0 – 31.5
S = 0.02 max Mo = 4.0 – 6.0
Si = 0.80 max Nb + Ta = 0.30 – 1.50
Other = 0.50 max W = 1.5 – 4.0

Please Call For More Information and Available Sizes

Application
ERNiCrMo-11 is used for welding nickel-chromium-molybdenum base materials to themselves, steel and other nickel base alloys.

Deposited Chemical Composition % (Typical)
C = 0.02 Co = 3.50 Ni = Balance
Mn = 0.90 Cu = 1.75 Cr = 29.5
Fe = 15.5 W = 2.10 Mo = 5.0
Deposited All Weld Metal Properties % (AW) 
Tensile Strength 89,000 psi
Elongation 28%

Deposited Charpy-V-Notch Impact Properties %
Not applicable

Recommended Welding Parameters for TIG, MIG, and SAW Welding of Nickel Alloys

Process Diameter of Wire Voltage (V) Amperage (A) Gas
Tig .035 inches x 36 12 – 15 60 – 90 100% Argon
.045 inches x 36 13 – 16 80 – 110 100% Argon
1/16 inches x 36 14 – 18 90 – 130 100% Argon
3/32 inches x 36 15 – 20 120 – 175 100% Argon
1/8 inches x 36 15 – 20 150 – 220 100% Argon

Note:  Other shielding Gases may be used for Tig welding. Shielding gases are chosen taking Quality, cost, and Operability into consideration.

Note:  Both agglomerated and fused fluxes can be used for submerged arc welding.

Note: The chemical composition of the flux mainly affects the chemistry of the weld metal and consequently its corrosion resistance and mechanical properties.