ENi-1 DMNA141
Class: ENi-1
AWS: A5.11
DURAMAX NA141
Conforms to Certification: AWS A5.11 | ASME SFA 5.11
Weld Process: Shielded Metal Arc Weld Process (SMAW)
| AWS Chemical Composition Requirements | |
| C = 0.10 max | Cu = 0.25 max |
| Mn = 0.75 max | Ni = 92.0 min |
| Fe = 0.75 max | Al = 1.0 max |
| P = 0.03 max | Ti = 1.0 – 4.0 |
| S = 0.02 max | Si = 1.25 max |
| Other = 0.50 max | |
Please contact us for more information and availability
Application
DURAMAX NA141 (ENi-1) has a nominal composition (wt.-%) of 95 Ni, 2.5 Ti. Electrodes of this classification are used for welding wrought and cast forms of commercially pure nickel to themselves and to steel (i.e. joining nickel to steel and surfacing steel with nickel). Typical specifications for the nickel base metal are ASTM B 160, B 161, B 162, and B 163, all of which have UNS Number N02200 or N02201. The weld metal has good corrosion resistance, particularly in alkalis. DMNA141 is well suited for welding chemical industry fabrications used to process vinyl chloride, fatty acids, soda, and sodium metal silicates.
• Used for joining Cu-Ni to stainless steels
• Welding of cast and wrought forms of pure Nickel alloys
| Deposited Chemical Composition % (Typical) | ||
| C = 0.02 | Mn = 0.30 | Fe = 0.40 |
| P = 0.01 | S = 0.01 | Si = 0.48 |
| Cu = 0.01 | Ni = 96.7 | Al = 0.03 |
| Ti = 1.2 | TOE = <0.50 | |
| Deposited All Weld Metal Properties % (AW) | |
| Tensile Strength | 73,000 psi |
| Yield Strength | 58,000 psi |
| Elongation | 33% |
Deposited Charpy-V-Notch Impact Properties %
Not applicable
Recommended Weld Parameters |
Amperage (A) |
||
| Diameter of Wire | Voltage (V) | Flat | Vertical and Overhead |
| 3/32 inches (2.4mm) | 20 – 23 | 70 – 80 | 65 – 80 |
| 1/8 inches (3.2mm) | 21 – 24 | 80 – 110 | 75 – 95 |
| 5/32 inches (4.0mm) | 22 – 25 | 120 – 160 | Not Recommended |
| 3/16 inches (4.8mm) | 23 – 25 | 170 – 190 | Not Recommended |