ERNiCrMo-4
Class: ERNiCrMo-4
AWS: A5.14
Conforms to Certification: AWS A5.14 | ASME SFA A5.14
Weld Process: GMAW, ASAW Welding Processes
| AWS Chemical Composition Requirements | |
| C = 0.02 max | Cu = 0.50 max |
| Mn = 1.0 max | Ni = Remainder |
| Fe = 4.0 to 7.0 | Co = 2.5 max |
| P = 0.04 max | Cr = 14.5 – 16.5 |
| S = 0.03 max | Mo = 15.0 – 17.0 |
| Si = 0.08 max | W = 3.0 – 4.5 |
| Other = 0.50 max | V = 0.35 max |
Available Sizes |
|
| Diameter X Spool Sizes | Diameter X Coil Sizes |
| .035 x 33# | 1/16 x COIL |
| .045 x 33# | 3/32 x COIL |
| 1/16 x 33# | 1/8 x COIL |
| 5/32 x COIL | |
Application
ERNiCrMo-4 is used for welding nickel-chromium-molybdenum base materials to itself, steel and other nickel base alloys and for cladding steel.
| Deposited Chemical Composition % (Typical) | ||
| C = 0.01 | Cr = 15.55 | Ni = Balance |
| Mn = 0.55 | Mo = 16.1 | Si = 0.04 |
| Fe = 5.5 | W = 3.65 | |
| Deposited All Weld Metal Properties % (AW) | |
| Tensile Strength | 105,000 psi |
| Yield Strength | 81,000 psi |
| Elongation | 40% |
Deposited Charpy-V-Notch Impact Properties %
Not applicable
Recommended Welding Parameters for MIG and SAW Welding of Nickel Alloys |
||||
| Process | Diameter of Wire | Voltage (V) | Amperage (A) | Gas |
| MIG | .035 inches | 26 – 29 | 150 – 190 | 75 % Argon +25% Helium |
| .045 inches | 28 – 32 | 180 – 220 | 75 % Argon +25% Helium | |
| 1/16 inches | 29 – 33 | 200 – 250 | 75 % Argon +25% Helium | |
| SAW | 3/32 inches | 28 – 30 | 270 – 350 | Suitable Flux May Be Used. |
| 1/8 inches | 29 – 32 | 350 – 450 | Suitable Flux May Be Used. | |
| 5/32 inches | 30 – 33 | 400 – 550 | Suitable Flux May Be Used. | |
Note: Other shielding Gases may be used for Mig welding. Shielding gases are chosen taking Quality, cost, and Operability into consideration.
Note: Both agglomerated and fused fluxes can be used for submerged arc welding.
Note: The chemical composition of the flux mainly affects the chemistry of the weld metal and consequently its corrosion resistance and mechanical properties.