ERNiCrFe-5

Class: ERNiCrFe-5
AWS: A5.14

Conforms to Certification: AWS A5.14 | ASME SFA A5.14

Weld Process: GTAW Welding Process

AWS Chemical Composition Requirements
C = 0.08 max Cu = 0.50 max
Mn = 1.0 max Ni = 70.0 min
Fe = 6.0 – 10.0 Co = 0.12 max
P = 0.03 max Cr = 14.0 – 17.0
S = 0.015 max Nb + Ta = 1.5 – 3.0
Si = 0.35 max Other = 0.50 max

Please Call For More Information and Available Sizes

Application
ERNiCrFe-5 is used primarily for gas tungsten arc and gas metal arc matching composition base metals. It is also used for welding Inconel 601 and Incoloy 800. It can be used to weld dissimilar metal combinations such as steel, stainless steel, Inconel and Incoloy alloys.

Deposited Chemical Composition % (Typical)
Ni = 73.0 Cr = 15.5 Nb = 2.2
Fe = 8.0
Deposited All Weld Metal Properties % (AW) 
Tensile Strength 80,000 psi
Yield Strength 40,000 psi
Elongation 30%

Deposited Charpy-V-Notch Impact Properties %
Not applicable

Recommended Welding Parameters for TIG, MIG, and SAW Welding of Nickel Alloys

Process Diameter of Wire Voltage (V) Amperage (A) Gas
Tig .035 inches x 36 12 – 15 60 – 90 100% Argon
.045 inches x 36 13 – 16 80 – 110 100% Argon
1/16 inches x 36 14 – 18 90 – 130 100% Argon
3/32 inches x 36 15 – 20 120 – 175 100% Argon
1/8 inches x 36 15 – 20 150 – 220 100% Argon

Note:  Other shielding Gases may be used for Tig welding. Shielding gases are chosen taking Quality, cost, and Operability into consideration.

Note:  Both agglomerated and fused fluxes can be used for submerged arc welding.

Note: The chemical composition of the flux mainly affects the chemistry of the weld metal and consequently its corrosion resistance and mechanical properties.